BSP Interlock Fitting

BSP Interlock Fitting

BSP interlock fitting has a 60° cone seat on female end and a 60° chamfer on male end. This type of interlock fitting can be use to connect 4SH and SAE 100R13  hydraulic hoses. 

If you have any questions of interlock BSP hose fittings, please contact us!

12613 interlock BSP firttingTopa

12613 BSP interlock fitting

13013 interlock BSPT fitting Topa

13013 BSP interlock fitting

22613 interlock BSP fitting Topa

22613 BSP interlock fitting

22643 interlock BSP fitting Topa

22643 BSP intrlock fitting

22693 interlock BSP fitting Topa

22693 BSP interlock fitting

BSP Interlock Fitting Video

This video is about the details of Topa BSP interlock fitting.

Interlock BSP fittings are made of high-quality carbon steel, and stainless steel. Those fittings can be applied in high-pressure hydraulic systems.

Please contact with us if you have any questions about hydraulic BSP fitting or other products.

Interlock Hose Fitting Catalog

This catalog is about interlock hose fittings.

Topa can offer all kind of hydraulic interlock hose fittings, and our catalog also including all of them.

Please contact us If you need more information of hydraulic hose fittings, or would like some free samples.

hydraulic hose fitting catalog
your name
E-mail
With Country Code
what can we do for you?

Metric Interlock Fitting

Metric Interlock Fitting

Metric interlock fitting has 24° cone o-ring fitting, 74° cone fitting and flat face fitting. All of those fittings include Heavy and Light type. Topa can provises all types of Metric interlock hose fitting, such as straight interlock fitting, 45-degree interlock fitting, and 90-degree interlock fitting.

If you have any questions of interlock Metric hose fittings, please contact us!

10513 interlock metric fitting Topa

10513 metric interlock fitting

20513 interlock metric fitting Topa

20513 metric interlock fitting

20543 interlock metric fitting Topa

20543 metric interlock fitting

20593 interlock metric fitting Topa

20593 metric interlock fitting

Metric Interlock Fitting Video

This video is about the details of Topa Metric interlock fitting.

Interlock Metric fittings are made of high-quality carbon steel, and stainless steel. Those fittings can be applied in high-pressure hydraulic systems.

Please contact with us if you have any questions about hydraulic Metric hose tail fitting or other products.

Interlock Hose Fitting Catalog

This catalog is about interlock hose fittings.

Topa can offer all kind of hydraulic interlock hose fittings, and our catalog also including all of them.

Please contact us If you need more information of hydraulic hose fittings, or would like some free samples.

hydraulic hose fitting catalog
your name
E-mail
With Country Code
what can we do for you?

Interlock Hose Fittings

Interlock Hose Fittings Factory in China

                     ※ High-temperature resistance

                     ※ High-pressure resistance

                     ※ Corrosion-resistance

                     ※ Durable

Interlock Hose Fittings Manufacturer in China

Interlock hose fittings provide a safe and leak-free connection between hose and machinery in high pressure environments. Topa’s interlock hose fittings are in strict compliance with international standards and are available upon request!

Interlock Hose Fittings Product List

Topa offers a full range of internlock fittings, including metric interlock fittings, BSP interlock fittings, NPT interlock fittings, JIC interlock fittings, flange interlock fittings, and JIS interlock fittings. Our fittings can meet all your needs, please contact us for more information!

BSP interlock hose fitting

BSP thread interlock fitting, straight/45-degree/90-degree.

JIC interlock hose fitting

JIC thread interlock fitting, straight/45-degree/90-degree.

NPT interlock hose fitting

NPT thread interlock fitting, for use with hydraulic hoses.

Metric interlock hose fitting

Metric thread interlock fitting, straight/45-degree/90-degree.

Flange interlock fitting

Code 61/62, 9000psi interlock fitting, straight/45-degree/90-degree.

Interlock hose ferrule

Interloc hose ferrule, for use with interlock hose fittings.

Interlock double connector

Double connector interlock hose fitting is usually used to connect two hoses.

Interlock Hose Fittings Video

This video is about tube cutting, cold bending, packaging, and other steps of hydraulic tube assemblies. You can click this video to check more details. If you want to know more information, please contact us.

Topa hydraulic fittings

Topa, as the best manufacturer of hydraulic fittings, has perfect production, quality inspection, and packaging processes to meet all customers’ needs. And Topa can also provide custom hydraulic fittings, welcome to order.

Your Reliable Interlock Hose Fittings Manufacturer

Interlock fittings are used in conjunction with multi-layered wire hydraulic hoses for use in high-pressure hydraulic environments, and Topa’s interlock fittings include a variety of threads and models to meet all your needs.

Interlock fittings are available in stainless steel, carbon steel and steel, depending on the environment in which they are used. However, the quality of all of our fittings is up to standard and you can order with confidence.

Advantages of Topa interlock fittings:

  • Durable
  • High pressure resistance
  • High quality
  • Affordable price
interlock fittings manufacturer process

Why choose us

As a manufacturer of hydraulic fittings, Topa can supply high quality hydraulic fittings to all customers. We have a wide range of fittings, including brake fittings, hose fittings, brass fittings, and adapters. These hydraulic fittings are available in both quality and quantity to meet your needs.

Topa can provide excellent customer service. From the moment you start asking for a quote, our staff will provide the highest quality service. You can ask all your doubts and our salesmen will propose a solution in the shortest possible time.

Topa factory performs quality tests on all fittings. We test the hardness, corrosion resistance, pressure resistance, and appearance of the fittings. We have professional testing equipments and will test them according to international standards. If you need a test report, you can contact our staff.

Topa can provide custom services. If you need a special customized fitting, you can provide detailed drawings and parameters, and our professional technicians will arrange production for you.

 

Interlock Hose Fittings Application

Interlock fittings can be used in high pressure hydraulic systems, where the end is divided into two areas: one for locking and the other for sealing. This type of fitting is popular because it ensures the smoothness and tightness of the hydraulic system. They are used in applications such as mining, plant, oil and gas, and aerospace.

oil and gas interlock fittings

Oil and gas

Hydraulic interlock hose fitting are resistant to high pressure and high temperature and are not easily corroded by fluids after special treatment.

industry interlock fittings Topa

Industry

Interlock hose fittings can be used in fixed or narrow positions in major hydraulic applications in factories. They can provide a leak free seal.

oil and gas interlock fittings

Mining

Mining application needs high-pressure resistance and durale interlock fittings, and Topa can offer all kinds of interlock hose fittings.

Quality Control​

FAQ

What is an interlock fitting?

An interlock fitting is a special type of hose fitting.

Why do I need an interlock fitting?

Interlock fittings can be used in high pressure environments without leaks.

What kind of hoses can be used with interlock fittings?

4SH and SAE 100R13 multi-layer steel wire braided hoses.

What are the advantages of interlock fittings?

 

Interlock fittings can withstand high pressure, are resistant to wear and tear, and have a strong seal.

What materials are interlock fittings available in?

Carbon steel, stainless steel and steel.

What applications require the use of interlock fittings?

All applications where multiple layers of steel braided hose are used.

What threads are available for interlock fittings?

NPT, BSP, JIC, and JIS threads.

Can we customize interlock fittings?

Yes, please provide detailed parameters.

Do you have interlock fittings in stock?

No, but we will arrange production as soon as possible.

How long does it take to make an interlock connector?

Normally, 30-45 days.

Get more information about products

your name
E-mail
With Country Code
what can we do for you?

Beaded Hose Fittings

Beaded Hose Fittings Manufacturer in China

  • Durable

  • Easy to operate

  • Affordable price

  • High quality

Beaded Hose Fittings Manufacturer in China

Beaded fittings have a tube on one end and a bulge on the back of the tube. This type of fitting requires hose clamps to be used with the hose. Topa offers a wide range of beaded hose fittings for low-pressure applications.

 

Beaded Hose Fittings Product List

Beaded hose fittings are used in low-pressure applications to connect hoses or pipes together in fluid systems. There are different types of beaded hose fittings, including straight types, elbow types, T-types, etc. Each type of fitting has a specific purpose in the system in which it is used. You can check the pictures below!

4404 beaded hose fitting Topa

4404

Beaded Hose to NPT pipe thread.

4503 beaded hose fitting Topa

4503

Beaded Hose to Pipe Elbow 45°, NPTF thread.

4501 beaded hose fitting Topa

4501

Beaded Hose to Pipe Elbow 90°, NPTF thread.

4604 beaded hose fitting Topa

4604

Beaded Hose to SAE O-Ring.

4603 beaded hose fitting Topa

4603

Beaded Hose to SAE O-Ring Elbow 45°.

4601 beaded hose fitting Topa

4601

Beaded Hose to SAE O-Ring Elbow 90°.

4504 beaded Union Tee Topa

4504

Beaded Hose Tee Fitting.

Beaded Hose Fittings Video

This video is about beaded hose fittings. Topa can offer all types and sizes of hydraulic beaded fittings, please contact us!

Topa hydraulic fittings

Topa has professional fitting production, quality inspection, and packaging processes. And we also provide custom hydraulic fittings, welcome to order.

Your Reliable Beaded Hose Fittings Manufacturer

Beaded hose fittings are specially constructed in that they are designed with an end with a barb. The barb will catch the inside of the hose and then with the help of the hose clamp, it will prevent the hose from slipping off.

The material of the bead fitting is determined by the environment, and the common fitting materials are brass, stainless steel, and carbon steel. In order to ensure that the hose will not slip off, the size of the beaded hose fitting should be in line with the size of the hose.

Advantages of Topa bead fittings:

  • Durable
  • Corrosion resistant
  • Standard size
  • High-quality materials
  • Affordable

Why choose us

As a company specializing in the manufacture of hydraulic fittings, Topa is committed to handling every order with care and attention to detail. In our factory, we have over 50 hydraulic fittings production machines throughout the entire production process, from raw material cutting to final product adapter inspection.

We are equipped with precision testing equipment that can check the hardness, size, and rust resistance of our fittings to ensure that all the quality details you care about are strictly controlled. To ensure your confidence in our products, we can provide the necessary supporting documents such as fitting testing certificates and shipping documents. If you have any special needs, just let our staff know and they will do their best to satisfy you!

Topa has a complete logistics system, and our staff will carefully pack your shipment to ensure that every joint product is protected from damage during shipment. We will arrange shipping according to your needs and select the most appropriate and economical way for you to minimize unnecessary losses.

 

hydraulic beaded fitting manufacturer China Workshop

Beaded Hose Fittings Application

Beaded hose fittings are designed to allow them to withstand different low pressures and temperatures, making them suitable for many different environments and applications.

They are used in a wide variety of fluid and gas transfer systems, including automotive cooling systems, industrial hydraulic systems, marine applications, domestic water supply systems, etc.

Beaded hose fittings automotive Topa

Automotive

Beaded hose fittings are suitable for automotive cooling systems, they are simple to install and do not require much labor or effort.

irrigation Beaded hose fittings Topa

Agriculture

Bead fittings are required in areas such as irrigation systems for agriculture. Brass bead fittings are the most affordable option and they are the best choice for agricultural machinery.

Beaded hose fittings industry Topa

Industry

Bead adapters are low-pressure hydraulic fittings used to transport fluids. They can be used with hose clamps and do not create leaks. Contact Topa for more information!

Beaded Hose Fittings Quality Control​

FAQ

What is a beaded hose fitting?

A beaded hose fitting is a special type of barb fitting that has a single barb on one end and can be used with a hose clamp.

What do beaded hose fittings do?

They are used to connect hoses and secure the passage of fluids.

What materials are beaded hose fittings available in?

Brass, stainless steel and carbon steel.

What threads are available for bead fittings?

NPTF, BSPT and metric threads are common.

What is the difference between a beaded fitting and a barb fitting?

A bead fitting has a single projection on the hose end, while a barb fitting has multiple projections on the hose end.

What are the advantages of bead fittings?

Bead fittings are relatively easy to install and operate.

Where can bead fittings be used?

In fluid systems for automotive, factory, and agricultural applications.

Can Topa customize beading fittings?

Yes, Topa can make custom fittings.

What is the minimum order quantity for bead fittings?

At least 100 pieces.

How long does it take to make a beaded fitting?

 

Normally, it takes 30-45 days to make a connector.

Get more information about products

your name
E-mail
With Country Code
what can we do for you?
measure hydraulic fittings Topa

How to Measure Hydraulic Fittings

How to Measure Hydraulic Fittings?

Welcome to this all-inclusive guide on measuring hydraulic fittings, a crucial task that demands precision and expertise. Whether you’re a seasoned hydraulic salesperson or a maintenance professional, this guide is designed to walk you through the entire process. From selecting the right tools to understanding the significance of each measurement, we’ve got you covered. We’ll also shed light on common mistakes that can compromise your hydraulic system’s integrity. So let’s dive in and set the stage for a hydraulic system that’s both reliable and efficient.

Table of Contents

Tools Required for Accurate Measurements

When it comes to measuring hydraulic fittings, you can’t afford to skimp on tools. The right tools not only make the job easier but also ensure that you get accurate and reliable measurements. Here’s what you’ll need:

 

hydraulic fittings measure tools Topa

Calipers or Measuring Tape

These are your go-to tools for measuring the diameter of the threads. Calipers are more precise, but a good-quality measuring tape can also do the job.

Thread Pitch Gauge

This tool is essential for determining the thread pitch, which is the distance between the threads. A wrong pitch can lead to incompatible fittings, so don’t overlook this.

Reference Charts

These charts contain standard sizes and dimensions for various types of hydraulic fittings. They’re a quick way to cross-reference your measurements.

Protractor

Protractors can be used to measure the angles of hydraulic fittings. The commonly fitting elbows are 30-degree, 45-degree, and 90-degree elbows, and there also exist other elbows. Special gauges are available to measure the angle of the sealing surface inside and outside of the fitting, such as 37-degree cone, 45-degree cone, and 30-degree cone.

Precautions to Take Before Measuring

Before you even touch a caliper or gauge, there are some precautions you need to take:

Depressurize the System: Always make sure the hydraulic system is off and depressurized. This is not just for your safety but also for accurate measurements.

Wear Safety Gear: Put on your gloves and safety glasses. It’s better to be safe than sorry.

Clean the Fitting: Dirt and debris can affect your measurements. Make sure the fitting is clean before you start.

Basic steps for measuring hydraulic fittings

Step 1: Determine the type of hydraulic fittings

hose fitting or adapter Topa
parallel or tapered Topa

First, you need to determine the types of hydraulic fittings. Is it a hose fitting or an adapter?

Before considering measurements, you need to determine the type of hydraulic fittings to be used. This step is critical because each fitting type has its own set of specifications and compatibility requirements. Whether you are an experienced hydraulic salesperson or a maintenance professional, knowing the type of fitting is the foundation for the work that follows.

There are several types of hydraulic fittings, each with its own set of standards. The most common types are JIC (Joint Industry Committee), NPT (National Pipe Thread), and ORFS (O-ring Face Seal). These are not just random acronyms, but industry standards that define the shape, thread, and function of the fitting.

So how do you recognize the type of fitting? First, check the fitting itself for any markings. Manufacturers usually print markings on the fitting type so that it is straightforward to identify. For example, in general, a US fitting will have two scores on it, whereas an imperial will only have one. If not, consult the manufacturer’s guide or specification sheet.

Why is this step so important? Using the wrong type of fitting can lead to a host of problems, from small leaks to catastrophic system failure. For example, NPT fittings may look similar to BSPT fittings, but they have different thread patterns and sealing methods. Mixing them up can be a recipe for disaster.

In short, determining the type of fitting is not only the first step, it’s a critical one. It sets the stage for all subsequent steps, from measurement to installation. So take your time, utilize the resources available, and make sure it’s correct. This is one area where you can’t rely on guesswork.

Step 2: Measuring thread diameter

id measure Topa
od measure Topa

Once the type of fitting has been determined, the next critical step is to measure the thread diameter. This may seem like a simple task, but it is both difficult and important. Thread diameter is a key factor in ensuring that hydraulic fittings are compatible with the rest of the system. Mismatched fittings can lead to leaks, inefficiency, and even system failure.

For this, you need a reliable measuring tool. Calipers are the most recommended standard tool in the industry, with accuracy to suit everyone’s needs. However, a high-quality tape measure can also do the job. Choosing between the two usually depends on the accuracy you need and the tools you have on hand.

For male threads, you need to measure the outside diameter. Place the caliper at the widest part of the thread, making sure it’s snug against the thread, but not so tight as to distort the thread. For female threads, the process is similar, but you are measuring the ID. Insert the caliper into the fitting and expand the caliper until it touches the inside wall.

Here’s a pro tip: Always double-check your measurements. Even the most experienced professionals can make mistakes, and in hydraulics, even a one-millimeter error can cause problems. Take several readings and then use the average value as the final measurement.

Why is this step so important? Because thread diameter directly affects a fitting’s ability to form a secure, leak-proof connection with the hose or component it connects to. Getting this wrong can jeopardize the integrity of the entire hydraulic system, not just a quick fix.

In short, measuring thread diameter should not be taken lightly. It requires precision, the right tools, and a double-checking mindset. Getting this right sets the stage for a reliable and efficient hydraulic system.

Step 3: Determining thread pitch

plug gauge Topa
ring gauge Topa

After measuring the thread diameter, the next critical step is to determine the thread pitch. Thread pitch is a critical factor in ensuring compatibility and a leak-free system. Thread pitch is essentially the distance between individual threads, measured in threads per inch (TPI). A mismatch in thread pitch can result in a poor fit, causing leaks and even damaged threads.

To measure thread pitch, you need a specialized tool called a thread pitch gauge. This tool comes with a variety of inserts, each labeled with a different TPI value. To use it, simply align the blades with the threads of the fitting until you find an exact match. This will give you the TPI value of the fitting.

Now, you may ask, what’s so important about this? Even if two fittings have the same diameter, differences in thread pitch can cause them to be incompatible. For example, a 14 TPI 1-inch NPT fitting will not fit a 12 TPI 1-inch NPT fitting. The threads won’t line up and you’ll either end up with a loose connection or damage the threads by forcing them together.

Here’s a pro tip: Always double-check the thread pitch measurement. A small mistake here can lead to big problems. If necessary, take several readings and confirm the TPI according to the manufacturer’s specifications whenever possible.

In hydraulics, it’s all in the details, and thread pitch is one detail that should not be overlooked. It’s not just about making sure you tighten the joint, it’s about ensuring a secure, long-lasting connection that won’t fail under pressure.

Step 4: Measuring seat angles

Once the thread diameter and pitch have been determined, it’s time to focus on another critical aspect: the seat angle. Seat angle is often overlooked, but it plays a critical role in ensuring a leak-proof connection. The angle is the inclination of the fitting seat as it interacts with its mating parts. Mismatched seat angles can lead to leaks, reduced system efficiency, and even component damage.

To measure the seat angle, you need to use a protractor or an angle-measuring tool designed for hydraulic fittings. Place the tool on the fitting seat and read the angle. The process is simple and straightforward but requires precision. One degree of deviation can compromise the integrity of your hydraulic system.

The seat angle determines how well the fitting seals against its mating parts. A perfect fit creates a leak-proof seal that can withstand high pressures and harsh conditions. Conversely, a mismatch can lead to leaks, which can be not only a nuisance but also a serious operational hazard. Leaks can lead to hydraulic fluid depletion, increased maintenance costs, and even, in extreme cases, system failure.

Here’s a pro tip: Always check seat angle measurements against the manufacturer’s specifications. This double-checking ensures that you are doing it correctly and helps you avoid costly mistakes.

In short, measuring the seat angle is a step that cannot be skipped or rushed through. It requires the right tools, consistent operation, and a meticulous attitude. Giving seat angle the attention it deserves not only ensures a leak-free connection but also improves the overall reliability and efficiency of your hydraulic system.

So the next time you choose a hydraulic fitting, don’t just focus on the threads. Give due attention to the valve seat angle as well. This small detail can have a major impact on the performance and reliability of your hydraulic system.

Step 5: Measuring fitting length

length measure Topa
hose fitting length

When it comes to hydraulic fittings, length is often the forgotten dimension. While thread diameter, pitch, and seat angle get all the attention, fitting length is just as critical to system performance and safety. Incorrect length can lead to improper sealing, increased stress on the fitting, and even system failure.

To measure fitting length, you’ll need a reliable measuring tool such as a caliper or straightedge. Align the tool with the joint, starting at one end and extending all the way to the other. Make sure you measure the entire length, including any flanges or extensions that may be part of the joint. You can’t use approximations for this step; accuracy is key.

Length directly affects a fitting’s ability to form a secure connection. Too short, and there’s a risk of an incomplete seal, leading to leaks. Too long, and it puts too much pressure on the joint and connecting parts, potentially leading to cracks or breaks over time.

Step 6. Cross-referencing measurement results

hydraulic fitting size chart Topa

You’ve measured thread diameters, determined thread pitches, checked seating angles, and even verified joint lengths. But there’s one more critical step before you continue with the installation: cross-referencing the measurements. In this step, you take out your reference charts and double-check that each measurement meets industry standards and your specific needs.

Even small differences in measurements can lead to serious problems. Cross-referencing is the final quality check to ensure that the fittings you’re about to install are the correct fittings for your hydraulic system. It’s the last line of defense against leaks, inefficiencies, and potential system failures.

To cross-reference, compare your measurements to the data on a reference chart. These charts often include standard sizes, thread types, and dimensions for various hydraulic fittings. Make sure your fitting measurements match the types and sizes listed. If they don’t match, you’ll have to redesign.

Here’s a pro tip: Always have the latest reference charts on hand. Manufacturers occasionally revise specifications, and using outdated information can lead to errors.

In conclusion, cross-referencing measurements is not only a best practice but a necessity for anyone who values the reliability and safety of their hydraulic systems. It’s the final step in confirming that you’ve done your due diligence to ensure that the fittings you install today won’t cause problems tomorrow. Taking the time to cross-reference sets the stage for a durable hydraulic system.

Common Mistakes to Avoid

When it comes to hydraulic fittings, there is very little margin for error. Even seasoned professionals can make mistakes that compromise the integrity of the system. Here are some common mistakes to watch out for:

● Over-tightedning fittings

It’s a common misconception that the tighter you tighten, the better. Over-tightening hydraulic fittings can distort their shape, which can lead to leaks and even component failure. The key is to find a proper position so that the joint is firm but not stressed. Always use a torque wrench and follow the manufacturer’s torque specifications to avoid this mistake.

● Using incompatible thread types

In the world of hydraulics, not all threads are created equal. Using an incompatible thread type can definitely lead to failure. Always double-check that the threads of the fitting match the threads of the connected component. A mismatch can lead to leaks, inefficiency and even catastrophic failure.

● Improper use of sealing methods

Sealing is an art in itself. Using the wrong sealing method or material can compromise the integrity of your hydraulic system. Always follow the manufacturer’s instructions when using a sealing method. Whether it’s a thread sealant or an o-ring, using the correct sealing method is critical to a leak-proof connection.

Conclusion

The Comprehensive Guide to Measuring Hydraulic Fittings is a great resource for professionals in the hydraulic industry. It covers the entire process from the required tools to the final cross-referenced measurement. The guide emphasizes the importance of each step and highlights common mistakes to avoid. By following these guidelines, you can ensure optimal performance and safety of your hydraulic system. If you only have old fittings and are not sure about the measured data, then you are welcome to contact us and we can give you an accurate answer!

Other articles

your name
E-mail
With Country Code
what can we do for you?

Field Attachable Hose Fittings

China Field Attachable Hose Fittings Supplier

※ Time-saving

※ No rust

※ No leaks

※ Easy to operate

Field Attachable Hose Fittings Manufacturer in China

Field attachable hydraulic hose fittings are also called reusable hydraulic hose fittings. These fittings are easy to remove and install, and no additional tools are needed, saving time and effort.

Field attachable fittings can be used with SAE 100R1, R2, R5, and PTFE hoses. They are used to transport fluids such as oil and gas, water, and fuel.

Product List

Topa’s field attachable hose fittings are of high quality, and robust. These hose fittings include BSP, JIC, ORFS, NPT, and SAE threads. The field attachable hose fittings are available in the straight, 45-degree, and 90-degree elbow for different applications, in addition to male and female threads.

As per a full selection of field attachable hose fittings supplier, Topa also could customize all kinds of reusable fitting.

Topa field-attachable hydraulic hose fittings could be replaceable with brand gates, caterpillar, aero quip, Weatherhead, Eaton, Parker, and so on.

Straight ORFS

Female ORFS straight field-attachable hydraulic fitting, ORFS female straight hose fittings.

45° Elbow ORFS

Female ORFS 45° field-attachable hose fittings, O-ring face seal female 45-degree elbow.

90° Elbow ORFS

Female ORFS 90° field-attachable hydraulic fittings, O-ring face seal female 90 degree elbow.

Male NPT

Male NPT field-attachable hydraulic fittings, NPT reusable hose fittings.

Male JIC

Male JIC field-attachable hydraulic fittings, hydraulic fittings 16717 JIC male reusable hose fittings.

Female JIC

Female JIC Swivel field-attachable hose fitting, 26718D JIC pipe fittings, JIC hydraulic hose fittings.

45° Bend JIC

Female JIC 45° bend hydraulic fitting, 26748 JIC female field-attachable hydraulic hose fitting.

90° Elbow JIC

Female JIC 90° Standard Drop hydraulic fitting, 26798D 90 degree elbow field-attachable fittings.

Straight SAE

27818 Female straight SAE hydraulic field attachable fitting, 45-degree cone flare.

45° Elbow SAE

27848 Female straight 45° elbow field-attachable fitting, 45-degree cone flare.

90° Elbow SAE

27898 Female 90° elbow reusable hydraulic fitting, 45-degree cone flare.

Male SAE 45°

SAE 100R5 field-attachable hydraulic fittings, SAE 100R5 SAE hydraulic hose fittings.

Male inverted flare

Straight male inverted flare field-attachable hydraulic fitting, reusable hose end inverted flare fittings.

90° elbow inverted flare

SAE 90° inverted flare hydraulic field-attachable fitting fitting, made of high-quality carbon steel.

Male BSP

Male BSP field-attachable hydraulic fitting, male BSP reusable hydraulic hose fitting.

Female BSP

Female BSP straight reusable hydraulic fitting, BSP female 60 degree cone fittings.

90° Elbow BSP

Female BSP 90° field-attachable hydraulic fittings, BSP female swivel hose fitting, 90° Elbow.

DN hose standpipe

DN Hose Standpipe field-attachable hydraulic fitting, reusable hose fittings.

Brake hydraulic reusable fitting

Brake hose field-attachable hydraulic fittings, elbow/straigh banjo eye brake hose fitting.

JIC male reusable fitting

Male JIC 37-degree cone flare field-attachable hydraulic fittings, made of carbon steel.

Code61 Straight Flange

Code 61 Flange straight field-attachable hydraulic fittings, code 61 flange rigid.

Code61 45° Flange

Code 61 flange 45° field-attachable hydraulic fitting, reusable hose fittings, 45 degree elbow.

Code61 90° Flange

Code 61 flange 90° field-attachable hydraulic fitting, reusable hose fitting, 90 degree elbow.

Field Attachable Fittings Video

Topa offers a full range of field attachable hose fittings in a variety of sizes and materials. You can click on the video to see the details of the field attachable fittings.

Hydraulic fittings Supplier Topa

China hydraulic fittings supplier and manufacturer. Topa provides all kinds of fittings and couplings.

Your Reliable Field Attachable Hose Fittings Manufacturer

Field attachable fittings belong to the category of two-piece fittings. It consists of a fitting and a sleeve.

These fitting bodies are generally available in different thread types, such as BSP, JIC, NPT, and ORFS, and are also available in male and female thread types. The attachable sleeve/ferrule can be screwed directly onto the fitting without additional tools. The small-size fittings can be installed directly by hand, which is very convenient.

The material of field attachable fittings depends on your needs. Carbon steel is the most affordable option. Stainless steel fittings are more expensive, but they are more resistant to corrosion.

Field attachable hose fittings are suitable for emergency situations, which can reduce maintenance costs and provide a more convenient condition for repairs.

Advantages of field attachable fittings:

◆ Time-saving

◆ Labor-saving

◆ Easy to install

◆ Wide range of thread options

◆ Wide range of applications

Why choose us

Topa is a specialized hydraulic fittings company. We offer a full range of the highest-quality hydraulic fittings to meet your needs.

Professional factory

Topa has more than 50 professional technicians and workers, as well as 30 automatic fitting production machines of different types, which can produce all types of hydraulic fittings.

Fitting processing method

Topa’s processing is included from raw material to inspection, in one stop. Our fittings are hot forged, punched, cylindrical turned, threaded, galvanized, etc.

Strict quality control

Our products have passed TUV, BV, and ISO inspections. And our fittings are 100% tested to ensure quality.

Customized fitting service

We provide custom fittings service, you can provide drawings and parameters, and we will arrange for professional technicians to participate in the design and production.

Fast shipping

Topa has specialized partner shipping companies, we can provide you with many kinds of shipping methods, such as sea, air, and land transportation.

field attachable fitting China factory process
field attachable fitting supplier process

Field Attachable Hose Fittings Application

Field-attachable fittings are particularly easy to install or remove, so many applications use field-attachable fittings. Many industries such as motor vehicles, refrigerators, chemicals, oil and gas, and food processing use reusable fittings to reduce losses.

field attachable hose fitting automotive

Automotive

Small field attachable hose fittings are used on motor vehicles. Field attachable fittings are easy to remove and install, so they are ideal for use on trucks, motorcycles, and small cars.

field attachable fitting manufacturer oil and gas

Oil and gas

The oil and gas uses field attachable fittings in locations that require frequent disassembly for ease of installation and disassembly. This type of fitting saves time and effort, and results in significant cost savings.

field attachable hose fittings food processing Topa

Food processing

Topa can provide high-quality field attachable hydraulic fittings that can be used safely in the food processing industry without additional damage.

Related Products

Topa is a professional manufacturer of hydraulic fittings. We provide a one-stop service. A variety of hydraulic products for you to choose from. Click the picture below for more hydraulic products.

Quality Control​

FAQ

What is a field attachable fitting?

An attachable fitting is a two-piece fitting that can be reused.

What does a field attachable fitting do?

Quickly connect or separate fittings and hoses.

What are the types of field attachable fittings?

There are field-attachable hose fittings, field-attachable flanges, and field-attachable brake fittings.

What are the applications of attachable fittings?

Field attachable fittings are mainly used in low or medium-pressure environments such as refrigerators, brake lines, and chemicals.

What are the materials of field attachable fittings?

Field attachable fittings are available in stainless steel, steel, and carbon steel.

How do I install a field attachable fitting?

Unscrew the sleeve, then install the fitting and hose together.

Can the field attachable sleeve be reused?

Yes.

Can I customize the field attachable fitting?

Yes, you will need to provide drawings.

Can Topa provide free sample reusable fittings?

Yes, but you need to pay shipping costs.

Does Topa have any stock?

The fittings are usually made after the order is placed to prevent stock products from being used.

Get more information about products

your name
E-mail
With Country Code
what can we do for you?

Hydraulic Tube Assembly

Hydraulic Tube Assembly supplier in China

                     ※ High-temperature resistance

                     ※ High-pressure resistance

                     ※ Corrosion-resistance

                     ※ Strength

Hydraulic Tube Assembly Manufacturer in China

Hydraulic tube assemblies are metal components that allow fluids to transport in hydraulic systems. Topa’s hydraulic tube assemblies include tubes and hydraulic fittings, and they are easy to operate in hydraulic systems. Topa also offers a complete range of hydraulic tube assemblies with high-quality assurance. Welcome to order.

Hydraulic Tube Assembly Product List

Hydraulic tubes involve a wide variety of types. In terms of material, stainless steel, steel, and carbon steel are commonly used. We also provide seamless and welded hydraulic tube assemblies. You can check the pictures below to find the product. If you don’t find the product you need, we also offer custom hydraulic tube assemblies.

hydraulic tube assembly Topa China wholesaler

Hydraulic tube assembly

Hydraulic tube assembly, made of steel, and carbon steel.

stainless steel hydraulic tube assembly Topa

Stainless steel hydraulic tube assembly

High-quality stainless steel, corrosion-resistence.

hydraulic steel tube assembly China Topa

Hydraulic steel tube assembly

Made of strong steel, for use with heavy machines.

carbon steel hydraulic tube assembly China supplier

Carbon steel hydraulic tube assembly

Carbon steel hydraulic tube assembly, an economical choice.

cds hydraulic tube assembly China factory

CDS hydraulic tube assembly

Cold bending seamless tube assembly.

China custom hydraulic tube assembly Topa

Custom hydraulic tube assembly

Topa offers custom hydraulic tube assembly services.

Cold Bending hydraulic tube assembly China Topa supplier

Cold bending hydraulic tube assembly

CDS/Cold bending hydraulic tube assembly.

weld hydraulic tube assembly Topa China manufacturer

Weld hydraulic tube assembly

Weld hydraulic tube assembly, can weld with hydraulic fittings.

Cold drawn seamless hydraulic tube assembly Topa

Cold drawn seamless hydraulic tube assembly

Cold drawn seamless hydraulic tube assembly.

Cutting sleeve hydraulic tube assembly Topa supplier

Cutting sleeve hydraulic tube assembly

Cutting sleeve hydraulic tube assembly, for use with machines.

hydraulic seamless tube assembly Topa wholesaler

Hydraulic seamless tube assembly

Hydraulic seamless tube assembly, no leaks.

Liugong heavy equipment 915EHD tube assembly

Liugong heavy equipment 915EHD tube assembly

For use with the Liugong tractor, forklift, and dumper.

LonKing 6075 hydraulic tube assembly Topa

LonKing 6075 hydraulic tube assembly

For use with Lonking heavy equipment.

Lovol agriculture equipment 130 steel tube assembly Topa

Lovol agriculture equipment 130 tube assembly

Foer use with Lovol agriculture heavy machine.

SK305LC-10 hydraulic tube assembly China Topa

SK305LC-10 hydraulic tube assembly

SK305LC-10 type hydraulic tube assembly, made of heavy steel.

SY55 steel tube assembly

SY55 steel tube assembly

SY55 steel tube assembly, for use with agriculture machines.

Hydraulic Tube Assembly Video

This video is about tube cutting, cold bending, packaging, and other steps of hydraulic tube assemblies. You can click this video to check more details. If you want to know more information, please contact us.

Topa hydraulic fittings

Topa, as the best manufacturer of hydraulic fittings, has perfect production, quality inspection, and packaging processes to meet all customers’ needs. And Topa can also provide custom hydraulic fittings, welcome to order.

Your Reliable Hydraulic Tube Assembly Manufacturer

At present, most hydraulic applications use hydraulic tubes and hoses together, which can adapt to many hydraulic applications. This pipeline combination takes advantage of two different pipes, greatly improving the efficiency of the hydraulic system.

The advantages of Topa hydraulic tube assemblies are remarkable:

※ High-temperature resistance

※ High-pressure resistance

※ Rust resistance

※ Long service life

※ Fast heat dissipation

※ Good conductivity

Topa, as one of the leading suppliers of hydraulic fittings in China, also provides excellent hydraulic tube assemblies. Both in terms of quality and size, we are committed to providing the best tube assemblies.

If you need hydraulic tube assemblies, please feel free to come to us with your hydraulic tube drawings and we will arrange the best technicians and service personnel to provide you with a quality shopping experience.

Why choose us

Topa is one source of certified compatible hydraulic hoses, hydraulic fittings, and accessories providers. As per one of the top hydraulic hose fittings manufacturers, we have more than 15 years of experience and our CEO has more than 20 years of experience. Topa has advanced equipment and strict quality control systems, Make us continue to progress and develop. We have a special advantage:

-provide tailored hydraulic fluid solutions

-knowledgeable and experienced engineers and sales

-Large inventory and prompt delivery

-Provide reliable leak-free connection solutions

-Flexibility to meet most of customer needs

-Guaranteed after service

-Free sample

Hydraulic Tube Assembly Application

Hydraulic tube assemblies are highly efficient pipeline components that can play a big role in many hydraulic systems, such as factories, agriculture, mining, ships, municipal, oil, and gas.

hydraulic tube assemblies oil and gas Topa

Oil and gas

Hydraulic tube assemblies are resistant to high pressure and high temperature and are not easily corroded by fluids after special treatment. In the field of oil and gas, tube assemblies can play a great potential.

industry hydraulic tube assembly Topa

Industry

Hydraulic tube assemblies can be used in fixed or narrow positions in major hydraulic applications in factories. All factories use hydraulic tube assemblies, which are used in combination with hoses.

shipping hydraulic tube assembly Topa

Ship

Large and small vessels use hydraulic tubes in their hydraulic systems. Hydraulic tubes are usually fixed in one position, and will not be displaced due to wind and waves, causing unnecessary losses.

Hydraulic Tube Assembly Related Products

Topa is a professional manufacturer of hydraulic hose fitting. We provide a one-stop service. A variety of hydraulic products for you to choose from. Click the picture below for more hydraulic products.

Hydraulic tube assembly quality control​

Hydraulic Tube Assembly FAQ

What is a hydraulic tube assembly?

A hydraulic tube assembly is a metal pipe assembly made up of hydraulic tubes, together with hydraulic fittings, to transport fluids safely and smoothly.

What are the types of hydraulic tube assemblies?

Cold bending tube assemblies, cold drawn tube assemblies, seamless tube assemblies, weld tube assemblies, and cutting sleeve hydraulic tube assemblies.

What are the advantages of hydraulic tube assemblies?

High-pressure resistance, less abrasion, high-temperature resistance, good thermal conductivity, and very good electrical conductivity.

What is the difference between a hydraulic tube assembly and a hydraulic hose assembly?

In short, the advantages of tubes and hoses are different. The tube has strong heat dissipation, good electrical conductivity, high-pressure resistance, and corrosion resistance, while the hose is more flexible, shock and wear resistant.

How to choose the right hydraulic tube assembly?

Choose the right rigid tube according to your own needs.

Where the hydraulic tube assembly is used?

Mining, oil and gas, motor vehicle, industrial, marine, material processing, and other industries.

How to make a hydraulic tube assembly?

After cutting and cold bending by the CNC machine, the corresponding fittings are installed or welded on, so that the assembly can be completed.

What materials are available for the hydraulic tube assemblies?

Stainless steel tube assemblies, steel tube assemblies, carbon steel tube assemblies.

Can Topa provide a custom hydraulic tube assembly service?

Yes, you just need to contact us with diagrams and drawings, and your needs for the hard tube.

How long does it take to make a hydraulic tube assembly?

Normally, about 30-60 days.

Get more information about products

your name
E-mail
With Country Code
what can we do for you?

Hydraulic Hose Fittings

JIS Hydraulic Hose Fittings

JIS hydraulic hose fittings have various sizes and types, including male and female hydraulic adapters, elbows, tees, and couplings, among others. They are designed to meet the JIS B2351 standard, which specifies the dimensions, materials, and performance requirements for hydraulic hose fittings.

Topa can provide large sizes and materials of JIS hydraulic hose fittings. Please contact us if you need more information on the JIC hydraulic hose crimp fittings.

JIS Hydraulic Hose Fittings Video

This video is about the details of Topa JIS hydraulic hose fitting.

JIS hydraulic hose fittings are designed for high-pressure hydraulic systems. They can be applied to various hydraulic fluids systems, including oil, water, and other fluid applications.

Please contact with us if you have any questions about hydraulic hose end fittings or other products.

Hydraulic Hose Fitting Catalog

Topa offers various types of hydraulic hose fittings, and this catalog includes all of them.

Please contact us If you need more information in selecting the right hydraulic hose fittings, or would like some free samples.

hydraulic hose fitting catalog
your name
E-mail
With Country Code
what can we do for you?

Hydraulic Hose Flange Fittings

Hydraulic Hose Flange Fittings

Hydraulic hose flange fittings are types of hydraulic hose fittings used to connect a hydraulic hose to a flange on machines or components. This type of fitting is commonly used in high-pressure hydraulic applications.

Topa can provide large sizes and materials for hydraulic hose fitting. Please contact us if you need more information on the hydraulic hose fitting.

Hydraulic Hose Flange Fittings Video

This video shows the details of hydraulic hose flange fitting.

Hydraulic hose flange fittings are commonly used in applications such as mining, construction, and oil and gas. All of those applications need a leak-free and reliable seal.

If you have any questions about flange fittings, please contact us.

Hydraulic Hose Fitting Catalog

Topa offers various types of hydraulic hose fittings, and this catalog includes all of them.

Please contact us If you need more information or assistance in selecting the right hydraulic hose fittings, or would like some free samples.

hydraulic hose fitting catalog
your name
E-mail
With Country Code
what can we do for you?

Compression Fittings

Hydraulic Compression Fittings

The compression mechanism of a hydraulic compression fitting typically includes a nut, a ferrule or sleeve, and a fitting body. Furthermore, hydraulic compression fittings come in various types, including tees, elbows, couplings, adapters, and valves, each with its specific function.

If you’re looking for hydraulic compression fittings in different sizes or materials, Topa can provide you with a wide range of options to meet your specific requirements.

Hydraulic Compression Fittings Video

This video shows the details of hydraulic compression fittings.

Hydraulic compression fittings are used in hydraulic systems to transport liquids and gases under high pressure. Including mining, agriculture, aerospace, and manufacturing.

Contact us for more information!

Hydraulic Compression Fitting Catalog

Topa can offer a full range of compression hydraulic fittings, including tees, elbows, couplings, adapters, valves, etc.
We also offer samples and custom services.
Contact us for more information!

compression fitting catalog
your name
E-mail
With Country Code
what can we do for you?
Crimp Style Hydraulic fitting catalog Topa